Leaks, and many other roof problems, can be difficult to fix, but they can be particularly challenging on mobile homes. Frequently the roof structure of your mobile home is not sturdy enough to actually walk on. This can make it difficult to patch leaks or make other necessary repairs.
Because of the problems involved in fixing roofs on mobile homes, foam roofing is a very appealing long-term solution. Here are four simple steps to follow that will ready your home for a foam roof application.
1. Clean or Remove Gutter Systems
The first project to get out of the way before installing your new foam roof is to make sure your gutter system is clean and in good condition. Many older mobile homes have permanent gutter systems.
If your home has such a system, be sure to clean it thoroughly and make any necessary repairs of leaks or bad spots in the gutter. Waiting until after your foam roof has been completed can make the job more difficult.
If your gutters are attached to your home and can be removed, it is best to take them off and have them reinstalled after the roof is complete. If you have any questions about your gutters, consult a roof and gutter specialist for advice.
2. Structural Soundness
Checking the structural condition of your mobile home is the next important step in prepping for a foam roof. If you are not educated in the structural concepts of your mobile home roof, it would be wise to consult with a professional who specializes in these matters.
One benefit you will have with a mobile home, is if you find a structural mistake after your roof has been foam covered, it is much easier to come from the inside, through the ceiling, to repair the problem. While this is a feasible way to repair structural problems after the fact, getting them fixed before you apply the foam layer is most certainly the best idea.
Having a licensed roofer check for damage will make sure you have a sound roof structure without any rot. Joints and metal ribs will be checked for gaps, or cracks. Fixing all of these problems ahead of time will guarantee your new foam roof adheres to your correctly to your existing roof.
3. Vents and Ridge Caps
Check all your roof vents for damage. If your roof has a vent cap running the full length of your mobile home, it is often a good idea to replace this before you have a new foam roof applied. Flashing and seams for any overhangs should also be checked, with any questionable seals filled before the foam is applied.
4. Clean Your Old Roof Surface
This is the final step in preparing to have a foam roof applied to your mobile home. To prevent air pockets and other problems from occurring during installation, your existing roof needs to be cleaned.
A bleach solution can help break down tree sap and other hard to remove buildup; after using the solution, pressure wash your whole roof. Finish your complete pressure washing at least a few days before your schedule foam application to allow your roof to dry completely.
Many foam roof specialists will give you a price breakdown to handle all of these steps, while you sit back and do nothing except wait for your new roof to be finished.
No one wants to contemplate the expenses resulting in a roof leak. Leaks in the roof of a mobile home can be even more drastic, so the condition of your roof is essential. A new foam roof is an excellent way to erase the worry of a leaky seam, or roof joint. A foam roofing applicator can explain to you how this can be a final fix for all your mobile roofing headaches.
Talk to experts like Armstrong Installation Service for more information.Share